for 1KG odorless molding material chocolate candle handmade soap Normal type [Silicone molding] HTV-2000 Harmless, For molds, molds, molds, etc.

★Mold silicone is harmless, odorless, and low viscosity, making it safe for beginners. ★It is possible to reproduce food, chocolate, transparent resin, resin, candles, soap, etc. ★Low viscosity makes it possible for general customers to manufacture, and the heat resistant temperature of the completed silicone mold can be up to 200℃. ★How to use HTV-2000: Mix the liquid type A and B materials thoroughly with a spatula (about 2 minutes), then pour into the frame containing the model.After 8 hours (at 23℃), form the silicone female mold. Since it is made of rubber, please wash it with a neutral detergent, then apply butter or the like to the mold and pour the chocolate into it. ★ Additive food grade type Milky white translucent Specific gravity 1.08 Hardness 18 Viscosity 4500 Elongation rate 500% Shrinkage rate 0.1% Tensile strength 4.8Mpa Tear strength 25kN/m Working time 35 minutes Demolding time 8 hours (23℃) ★HTV-2000 is a low viscosity 4500 cps milky white translucent silicone with a hardness of 18 and an elongation rate of 500%, and after curing it becomes a soft type. Molding such as single-sided molding is possible. It can now be used for food molds, candle molds, soap molds, silicone molds, etc., and the standard curing time is 8 hours (23℃). Most silicone for models is condensed silicone and is for industrial use (for models). Most hardeners contain harmful ingredients (tin compounds) and cannot be used for food molds, candle molds, soap molds, or in close contact with the skin, but the HTV series is suitable for food molds. It is a harmless, odorless silicone that can be used for molds, and it has a low viscosity and can be made by individuals. *Required items: prototype, kitchen scale (1g unit), spatula, clear cup (paper cup), etc. *Flower clay is used as a mold for making double-sided molds of food-grade silicone and for fixing the prototype. *Butter or Vaseline can be used as a silicone to silicone mold release agent for double-sided molds. ★★★For the double-sided molding method, apply a thin layer of salad oil to the flower clay with a brush in order to remove it from the silicone after hardening. (If too much is applied, the painted area will not harden. If applied, the flower clay will easily peel off from the silicone after hardening.) Never apply vegetable oil to other prototypes (resin, transparent resin, or other clay). Please make sure not to. Please test with a small amount before use. *Instruction included *Contents 1KG (500g x 2) set