For Ford Connect Long Chassis Chrome Side Door Streamer 2002-2014 4 Pieces Stainless Steel

Ford Connect Long Chassis Side Door Trim 2002-2014 4 Pieces Stainless Steel THE PRODUCT SOLD IS NOT THE SIDE DOOR TRIM OF THE VEHICLE. IT IS AN ACCESSORY MADE OF STAINLESS STEEL CHROME THAT IS GLUED ONTO THE CURRENT SIDE DOOR TRIM OF THE VEHICLE. THE RIGHT AND LEFT SIDES ARE SHIPPED AS A SET FOR ONE VEHICLE. All Brand's Chrome products are produced from 1st Class Stainless Steel. Brand'sagainst rust. There is double-sided tape on the back of the products. Assembly Instructions: 1- Install in a dry and dust-free environment. 2- The ambient temperature during assembly should be between 15C and 35C. If the ambient temperature is below 15C, do not dry the surface with a hair dryer, etc. 3- Before removing the tapes of the part to be bonded, first try the assembly, starting from the oval and closed surface. 4- Clean the surface to be bonded meticulously with acetone, spirit or pure alcohol with the help of a cotton cloth. 5- After cleaning the surface to be bonded, protect it from dust and oil. 6- DO NOT clean the surface to be bonded with oily or additive substances such as wet wipes, water, thinner, gasoline, diesel oil, cologne. 7- After applying the cleaning process to the surface to be bonded, wait 5 minutes and then start the bonding process. 8- Remove the protective surface of the double-sided tape on the product and try again. Install starting from the oval and closed surface. 9- During the assembly process, pat the product with a soft cloth or fingertips to make it fit. Press on the part for a minute and again with a hair dryer etc. Apply heat using the help of heat. CAUTION: Since the tape used will show its full properties within 24 hours, use the glued part carefully during this period. To prevent the glued part from loosening, tape it with paper or packaging tape that you can remove after 24 hours. Be careful not to wash your vehicle within 24 hours.